Setting up a Brick Paver Walkway or Brick Crusher Machine

The use of Bricks or Pavers to develop a pathway or outdoor patio complements a house in a way that is unequaled. In addition, installing a Brick or Paver walkway does not always need a pro.

The key to installing a Brick or Paver Walkway is to first correctly prepare the area where the bricks/pavers are to be installed. The location needs to be dug out a minimum of a foot down, eliminating all topsoil and clay soil. In addition, string lines need to be strung on each side of the sidewalk. The string lines indicate the completed height of the walkway.
When the location has actually been dug down, 3/4" gravel stone should be laid in and tamped down firmly. The height in between the tamped down sand and the stringline ought to equal the density of the brick or paver.

Now that you have a stable base, position a 1" pipeline or journal board the length of the sidewalk on either side of the sidewalk. Then using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will develop a level surface area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Install an operate on both sides of the ready area. These strips will serve as your pathway border and assistance to preserve the integrity and shape of the sidewalk. You can get these plastic strip borders at most house improvement stores. The strips ought to be anchored down with 12" galvinized nails. You must sink these nails into the ground and through the strips every foot.

You can then begin to lay the bricks/pavers once this is done. There are many patterns you can lay. I particularly like the Herring Bone pattern. The secret to laying the bricks/pavers is to ensure that they interlock with each other. Always stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again help maintain the integrity of the sidewalk.

When building the walkway, undoubtedly bricks/pavers will need to be cut or split. Unless you desire to buy or lease a costly wetsaw, I would recommend buying a simple website brick/paver splitter. It is generally a chisel with a large end that is the width of the bricks/pavers. To actually cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the area where you wish to break the brick. Using a hammer strike the butt end of the chisel securely. You may require to do this a couple of times. You may likewise wish to turn the brick/paver over and strike the other side of the brick utilizing the hammer and chisle. Within a couple of strikes the brick/paver need to break easily. If your walkway has curves you will need to buy/rent a wetsaw.

After installing the bricks, develop up the outdoors edges with additional sand, and then shovel in the topsoil and load down securely.
Spread stone dust over the new walkway and sweep into the cracks. Repeat this procedure a number of times to make sure the fractures are totally filled. This will finish the interlocking of the bricks and assist to get rid of any weed development. Simply add grass seed to the here outside edges and you must have a gorgeous entryway to your home within a couple of weeks.


In addition, setting up a Brick or Paver pathway does not always require a pro. The key to setting up a Brick or Paver Walkway is to first properly prepare read more the area where the bricks/pavers are to be installed. Now that you have a steady base, place a 1" pipe or journal board the length of the pathway on either side of the pathway. These strips will act as your walkway border and assistance to keep the integrity and shape of the pathway. Inevitably bricks/pavers will require to be cut or divided when developing the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *